News Flash

Home - News

Posted on: September 26, 2022

Wulf Recreation Center Pool Undergoes Major Repairs

Bob and Mike repairing Wulf's Pool Pump

On August 22nd, the WRC pool heater shut down and began to leak. In an effort to keep the pool open, the maintenance and aquatics staff monitored the temperature hourly. We were happy to see some of our patrons brave the chillier-than-normal water temperatures - and some even said they preferred it!


Despite our team's best efforts to get the pool back to normal operations, the circulation pump began to leak shortly after. Once the parts to fix the heater arrived, the pool was closed to complete maintenance on the heater and to get the circulation pump up and running. Further inspection of pool pump parts led to the discovery of additional repairs that needed to be made on equipment that was not in stock with our suppliers. 


Knowing that we were at a standstill waiting for parts to be delivered, EPRD decided to close the pool down, drain it, and begin a long list of necessary repairs.


POOL  AND POOL ROOM

  • Power wash pool deck, gutters, and equipment

  • Power wash inside the pool

  • Sand, scrape, and wash scale from gutters and tiles above

  • Spray 14 gallons of acid to the inside of the pool to remove stains and brighten the tile

  • Power wash to remove acid and flush copper flow lines and inlets

  • Repair inlets as needed and install new stainless hold-down screws 

  • Replace missing tiles and remove and replace broken tiles

  • Apply 180 pounds of grout to the walls and bottom of the pool to replace missing grout

  • Grout between gutter and pool walls so gutters can function as intended

  • Wash all stainless handrails of acid mist and protect them from rust

  • Inspect the diving board and re-torque base bolts

POOL  MECHANICAL ROOM

  • Remove the old one and install the new heat exchanger in the boiler

  • Remove both pumps and volutes

  • Pump out the remaining water in the surge pit

  • Shovel and remove 7 pails of debris and pool finds

  • Do minor repairs to the wooden divider in the surge pit

  • Paint railings around surge pit safety yellow

  • Clean drain pit

  • Remove filter and grid assemblies from DE pit

  • Power wash filters and soak in sodium triphosphate

  • Acid wash, power wash, and apply 2 coats of epoxy to DE pit

  • Cut and install new connecting hoses and clamps for grids

  • Install new grids and filters in DE pit

  • Paint stair edges "safety" colored yellow and sand and paint the railing at the stairs

  • Clean UV housing and protect from rust

  • Totally clean mechanical room and power wash rugs

  • Rinse old filters, soak in mild acid, rinse and put in storage

  • Install lift pump, new motor-volute-impeller-seals

  • Install circulation pump, new impeller, and seals

Once all of these tasks were complete, we began to refill the pool on September 27th and it was ready to reopen on October 10th. A huge thank you to Bob Kellog, Mike Carpenter, Jenny Bolduc, Kevin Sullivan, and Marilyn Krause for all of their hard work in getting WRC pool up and running again! For more information on aquatics, please click here. 

Additional Info...
Facebook Twitter Email

Other News in Home - News